 Datasheet |
 Manual |
The SmarteLight™ is installed at your equipment and sends a wireless signal to the local cellular tower. That signal is bounced to OmniSite’s web interface, where customers can log on – any day, any time, from any computer – and see how the equipment is operating.
A “call out” list is set up online, so that when an alarm is triggered at your equipment, identified operators are contacted immediately. Because our engineers recognize today’s fast-paced busy world, that notification comes by way of text message, email, or call to your cellular or hard-wired phone.
SmarteLight™ includes OmniSite’s “plug and play” GuardDog web interface, which eliminates the need for custom programming.
Try Our Free GuardDog DemoOmniSite improved the traditional alarm light by adding Cellular Telemetry to the circuit. SmarteLight™ is applicable everywhere you would want an alarm light and need a reliable monitoring solution that includes data logging and web-based access.
- Web-Based interface for data logging and reporting.
- Battery backup gives notifications of power failures.
- NEMA 4 equivalent rating for direct mounting indoors and outdoors.
- Complete install and setup in less than an hour.
| Single Input Alarm Channel | 12 VAC/VDC – 120 VAC/VDC, opto-isolated to 4000VAC |
| Power | 12 VDC or 120 VAC |
| Communications | Cellular GSM 850/900/1800/1900 MHZ |
| Operating Temp. | -20/150 Deg F |
| Operating Humidity | 0-90% RH Non-condensing |
| Certification | UL Pending |
| Dimensions | 4″W round base x 5″H |
| Enclosure | NEMA 4x equivalent rating for direct mounting indoors or outdoors |
