We’re Proud to Announce the Release of Our New Viper Product February 14, 2007 OmniSite Post in Autodialer,cellular monitoring solutions,Dialer,lift station,Monitor,pump station,SCADA,sewer lift station,telemetry,wastewater The Viper Lift Station Monitoring Unit provides a low-cost solution to meet the demands of utility managers who must balance professional results with a small budget. The Viper is a flexible, easy to install and configure, powerful lift station monitor that offers many of the advanced features of the XR50 but at a lower cost. The Viper provides the capability to monitor remotely located sewage lift stations without dedicated telephone lines or proprietary radio systems. Your connected lift station is completely monitored over the Internet using just a web browser, so there is no software to buy. If an abnormal condition occurs, notifications are sent by e-mail, pager, or voice call to any location. The Viper’s features include: Microprocessor based controller and alarm monitor Report daily runtime and on/off cycles up to 3 pumps Report pump draw-down and refill times per cycle Analyze pump operation before failures occur Calculate total station flow without a flow meter About OmniSite OmniSite is a cellular monitoring solutions company that provides cellular monitoring and control of equipment to the water and wastewater industries. The OmniSite system was specifically designed to be the easiest to install, setup and use lift station monitor on the market. OmniSite cellular monitors are on sewage pumping stations across the country, allowing operators to view and analyze data from any computer at any time and anywhere. OmniSite is privately held with headquarters in Greenwood, Indiana. For more information, please visit www.omnisite.com, or e-mail us at firstname.lastname@example.org. If you enjoyed this post, please consider leaving a comment or subscribing to the RSS feed to have future articles delivered to your feed reader.