OmniBeacon Visual Alarm Light and Cellular Transmitter The OmniBeacon is installed on your equipment and sends a wireless signal to the local cellular tower. That signal is bounced to OmniSite’s web interface, where customers can log on – any day, any time, from any computer – and see how the equipment is operating. Brochure Datasheet User Manual A “call out” list is set up online so that when an alarm is triggered at your equipment, identified operators are contacted immediately. Because our engineers recognize today’s fast-paced busy world, that notification comes by way of text message, email, or call to your cellular or hard-wired phone. OmniBeacon includes OmniSite’s “plug and play” GuardDog web interface, which eliminates the need for custom programming. Try Our Free GuardDog Demo The OmniBeacon looks, feels, and installs like your typical alarm light. Simply attach it to the alarm output of any device and when the output is triggered the light turns on and the siren sounds. Only, the OmniBeacon does not stop there, it’s connected with the local cellular network and OmniSite’s cloud servers to give operators real-time alert notifications via text, email, and voice.OmniSite improved the traditional alarm light by adding Cellular Telemetry to the circuit. OmniBeacon is applicable everywhere you would want an alarm light and need a reliable monitoring solution that includes data logging and web-based access. View a Case Study demonstrating the benefits of the OmniBeacon. Features: Web-Based interface for data logging and reporting. Battery backup gives notifications of power failures. NEMA 4 equivalent rating for direct mounting indoors and outdoors. Complete installation and setup in less than an hour. Technical Specifications: Dual Input Alarm Channels: (1) 12VAC/VDC – 120 VAC/VDC, optoisolated to 1500VAC input and (1) Dry Contact Input Alarm Light Bulb Super bright LEDs, long-life Alarm Light State Pulses LEDs at 3Hz, selectable for Inputs #1 and #2 Cellular Radio 4G LTE CAT-1 Certifications FCC Parts 15, 22, 24; RoHS compliant; IC: RSS-132 & 133 Antenna Integrated, on board Input Power 120VAC +/-20% @ 0.5A max; 12VDC Version: 12VDC +/-15% @ 1.5A max Alarm Light Annunciator 2.8kHz, 85dB, selectable for Inputs #1 and #1, pulses at 3Hz Backup Battery External 6VDC Sealed Lead Acid, 1.3AH, Re-chargeable, .187″ Faston spades Communications CDMA Dual Band 1xRTT (CDMA2000) 800/1900 Operating Temp. -20/150 Deg F Operating Humidity 0-90% RH, non-condensing Dimensions 5″W round base x 5″H Weight 1 lb Enclosure NEMA 4x equivalent rating for direct mounting indoors or outdoors Protections US Patent #7,228,129 and #7,778,633